Description
Shurflo 9300 Series Solar Water Pumping Kit, 230 Feet Head Height (NO Pole Mount)
This Solar Water Well Pumping system can pump 1.36 gallons per minute at a max of 230', lower head distances will increase flow rate (see table below). If you would like to check out a similar kit but include the pole mount for the solar panel go here - Shurflo 9300 Solar Water Pumping Kit, 230 feet With Pole Mount
Kit Details:
- Shurflo 9300 Submersible Pump
- Shurflo 9300 series 902-100 (LCB-O) pump controller
- 2 x 80w 12v Solarland USA solar panels
Note:
- The solar panels must be wired in series for a 24v output. The 902-100 (LCB-O) pump controller must be mounted in a dry location.
- For water pump cable please see the following links 10/2 without ground. We recommend the 902-200 (LCB-G)controller for solar water pumping systems with a battery bank since a system with the 902-100 (LCB-O) would require an additional charge controller if a battery bank was required.
Check out other Shurflo 9300 Pre-designed Deep Well Solar Water Pumping Kits Here
- 
	Shurflo 9300 Series Solar Water Pumping Kit System up to 120 feet With Pole Mount 
- 
	Shurflo 9300 Series Solar Water Pumping Kit System up to 120 feet No Pole Mount 
- 
	Shurflo 9300 Series Solar Water Pumping Kit System up to 230 feet With Pole Mount 
| 
 | ||
| 
 | ||
| 
 
 
 | 
| Array Direct Performance (24V array) | |||
| Vertical lift | Minimum solar array size | Flow rate (gpm) | Amps @ 30V | 
| 20 | 2 x 32 watts | 1.95 | 1.5 | 
| 40 | 2 x 32 watts | 1.90 | 1.7 | 
| 60 | 2 x 50 watts | 1.81 | 2.1 | 
| 80 | 2 x 50 watts | 1.76 | 2.4 | 
| 100 | 2 x 50 watts | 1.71 | 2.6 | 
| 120 | 2 x 50 watts | 1.68 | 2.8 | 
| 140 | 2 x 80 watts | 1.65 | 3.1 | 
| 160 | 2 x 80 watts | 1.63 | 3.3 | 
| 180 | 2 x 80 watts | 1.55 | 3.6 | 
| 200 | 2 x 80 watts | 1.52 | 3.8 | 
| 230 | 2 x 80 watts | 1.36 | 4.1 | 




