Description
Built for full-time use, this pump flows 16 gallons per minute on standard 110V power and reaches depths of 250 feet without any added circuitry.
Key Features
- High Flow Output: Centrifugal impeller design delivers 16 gallons per minute at 110V input.
- Deep Well Capable: Pumps water from lift depths up to 250 feet with no interface required.
- Caustic Water Resistant: High-output centrifugal pump end holds up against harsh water qualities.
- Protected Motor: Water-filled jacket allows deep submersion below static water level.
- Field Repairable: Pump end removes and replaces easily using the available repair kit.
Brushless DC motor technology eliminates the maintenance and replacement typically required with conventional DC brushes. The entire pump body, including impellers, is stainless steel for code compliance.
Wright Morgan recommends pairing this pump with a tank or pressure shutoff. Stopping the motor once surface water needs are met extends the unit's operating life significantly.
At 27 inches high and 3 inches in diameter, it fits standard 3.5-inch well casing. Output runs through a 1 1/4-inch FNPT connection, backed by CE certification.
Technical Specification
| Item | Specification |
|---|---|
| Voltage | 110V |
| Max Lift | 250 ft |
| Max Flow | 16 GPM |
| Output Connection | 1 1/4 in FNPT |
| Motor Type | Brushless DC |
| Pump Technology | Centrifugal impeller |
| Pump Body Material | Stainless steel (including impellers) |
| Motor Protection | Water-filled jacket |
| Height | 27 in |
| Diameter | 3 in (fits 3.5 in casing) |
| Weight | 27 lbs |
| Certifications | CE |
Specs & Info