Description
Built for wells that sit idle for months at a time, this pump plugs directly into a standard outlet and starts pumping from as deep as 175 feet with no extra circuitry.
Key Features
- Seasonal-Friendly Design: Leave it in the well unused for months, then swap the progressive cavity insert to restart.
- Deep Well Capable: Delivers 15 gallons per minute from lift depths up to 175 feet.
- Simple, Reliable Technology: Single moving part progressive cavity design reduces points of failure.
- Protected Motor: Oil-filled jacket shields the submersible motor, using food-grade oil to protect potable water.
- Field Repairable: Disassembles for basic service using available repair kits and online guides.
Brushless DC motor technology eliminates the maintenance and replacement typically required with conventional DC brushes. The entire pump body is stainless steel for code compliance.
Wright Morgan recommends pairing this pump with a tank or pressure shutoff. Stopping the motor once surface water needs are met extends the unit's operating life significantly.
At 34 inches high and 3 inches in diameter, it fits standard 3.5-inch well casing. Output runs through a 1-inch FNPT connection, backed by CE certification.
Technical Specification
| Item | Specification |
|---|---|
| Voltage | 110V |
| Max Lift | 175 ft |
| Max Flow | 15 GPM |
| Output Connection | 1 in FNPT |
| Motor Type | Brushless DC |
| Pump Technology | Progressive cavity, single moving part |
| Pump Body Material | Stainless steel |
| Motor Protection | Oil-filled jacket (food-grade oil) |
| Submersion Limit | 100 ft below static water level |
| Height | 34 in |
| Diameter | 3 in (fits 3.5 in casing) |
| Weight | 19 lbs |
| Certifications | CE |
Specs & Info