Description
The Victron Energy Blue Smart IP67 12/7 is a Bluetooth-enabled, fully encapsulated waterproof smart battery charger delivering 7A of charge current from a 120V AC input, with a five-stage adaptive charge algorithm, Li-ion compatibility, and cast aluminium construction for 12V battery systems in the most demanding environments.
Key Features:
- IP67 Fully Waterproof & Shockproof — Cast aluminium housing with electronics moulded in resin provides complete protection against water, oil, dirt, and shock — fully submersion-resistant and ignition protected for marine, automotive, and industrial use.
- Bluetooth Smart Enabled — Monitor voltage and current, change settings, and receive firmware updates wirelessly via the VictronConnect app on any Apple or Android device.
- Five-Stage Adaptive Charge Algorithm — Microprocessor-controlled bulk, absorption, recondition, float, and storage stages automatically optimize the charge process based on how the battery is being used.
- Storage Mode with Weekly Equalization — Reduces float voltage to 13.2V after 24 hours without discharge to minimize gassing and plate corrosion, then raises voltage weekly to prevent electrolyte stratification and sulfation.
- Full Discharge Recovery — Initiates charging on batteries discharged to 0V and reconnects to fully discharged Li-ion batteries with internal disconnect function.
The Blue Smart IP67 12/7 charges at 7A continuous (2A in low current mode for smaller batteries) with 93% efficiency, wasting three to four times less heat than industry-standard chargers, and reduces to under 0.5W no-load power once fully charged. Output current automatically derades 3% per °C above 40°C up to a maximum of 60°C without charger failure, making it suitable for hot machine room installations.
Two onboard LEDs provide at-a-glance status indication — a yellow LED indicates bulk (fast blink), absorption (slow blink), float (solid), or storage (off), while a green LED confirms power on. The 1.5m AC cable with NEMA 5-15 plug and 1.5m battery cable are included, with a start interrupt option providing short-circuit-proof current-limited output at up to one volt below the main output for engine start protection.
Technical Specifications
| Specification | Details |
|---|---|
| Model | Blue Smart IP67 Charger 12/7 |
| Input Voltage Range | 100–135VAC, 45–65Hz |
| Charge Current – Normal Mode | 7A |
| Charge Current – Low Mode | 2A |
| Maximum Efficiency | 93% |
| No-Load Power Consumption | 0.5W |
| Charge Algorithm | 5-stage adaptive |
| Charge Voltage – Absorption (Normal) | 14.4V |
| Charge Voltage – Absorption (High) | 14.7V |
| Charge Voltage – Absorption (Li-ion) | 14.2V |
| Charge Voltage – Float (Normal/High) | 13.8V |
| Charge Voltage – Float (Li-ion) | 13.5V |
| Charge Voltage – Storage (Normal/High) | 13.2V |
| Charge Voltage – Storage (Li-ion) | 13.5V |
| Protection | Battery reverse polarity (fuse), output short circuit, over temperature |
| AC Connection | 1.5m cable with NEMA 5-15 plug |
| Battery Connection | 1.5m black and red cable |
| Protection Category | IP67 |
| Operating Temperature | -30°C to +60°C (full output up to 40°C, derate 3%/°C above 40°C) |
| Humidity | Up to 100% |
| Material | Cast aluminium (blue RAL 5012) |
| Weight | 1.8 kg (4.0 lbs) |
| Dimensions (H x W x D) | 85 x 211 x 60 mm |
| Safety | UL 1236, CSA C22.2, EN 60335-1, EN 60335-2-29 |
| Emission/Immunity | EN 55014-1/2, EN 61000-6-1/2/3, EN 61000-3-2/3 |
| Automotive Directive | ECE R10 |
Specs & Info