Victron Energy BlueSmart IP65 12/10 120V | NEMA 1-15P Battery Charger

The Victron Energy Blue Smart IP65 Charger 12/10 is a Bluetooth-enabled 120V AC smart battery charger delivering 10A of charge current to 12V lead-acid and lithium battery banks.

Housed in an IP65-rated enclosure that is fully sealed against dust, water splash, and chemical exposure, the Blue Smart IP65 12/10 is equally at home in marine engine rooms, RV battery compartments, workshop environments, and outdoor installations where a conventional charger would be vulnerable to the elements.

With a seven-step smart charge algorithm, automatic recovery of fully discharged batteries, temperature-compensated charging, and full setup and monitoring via the VictronConnect app over Bluetooth, the Blue Smart IP65 12/10 delivers professional-grade charging performance in a compact, fanless, completely silent enclosure.

Key Features:

• Seven-Step Smart Charge Algorithm — Executes a full charge cycle through Test, Bulk, Absorption, Float, Storage, Refresh, and optional Recondition stages, maximizing charge quality and long-term battery health for lead-acid batteries; a dedicated Li-ion (LiFePO₄) algorithm with automatic under-voltage protection reset is also available
• Bluetooth Setup and Monitoring via VictronConnect — Full charger configuration, real-time voltage and current readout, and charge status monitoring via the VictronConnect app on Apple and Android devices; no additional hardware or dongles required
• IP65 Water, Dust, and Chemical Resistance — Fully sealed enclosure rated IP65 and ignition protected, suitable for marine, RV, and outdoor installations; fanless design with no moving parts for completely silent operation and maximum long-term reliability
• Recovery of Fully Discharged Batteries — Initiates low-current charging on batteries discharged to 0V, recovering batteries that standard reverse-polarity-protected chargers would fail to recognize; resumes normal charging once sufficient terminal voltage is established
• Storage Mode with Weekly Refresh — Reduces float voltage after 48 hours of continuous connection to minimize positive plate corrosion; automatically executes a brief weekly refresh cycle to maintain full charge state during long-term storage
• Temperature-Compensated Charging — Measures ambient temperature during the test phase and adjusts charge voltage at 16mV/°C throughout the charge cycle; no manual seasonal adjustment required; rated for full output down to -40°C with severe cold performance to -30°C

The Blue Smart IP65 12/10 operates at up to 94% efficiency — generating up to four times less heat than industry-standard chargers — and reduces standby power consumption to just 0.5W once the battery is fully charged, five to ten times better than conventional chargers. A low current mode reduces charge current to 3A for charging smaller batteries without risk of overcharging, making this model suitable for batteries from 30Ah up to 100Ah. The 1.5-meter battery connection cable terminates in M8 eyelets included in the box, with optional clamps, fused clamps, fused M6/M8 eyelets, and an Autoplug available separately for flexible connection configurations.

The included 1.8-meter AC power cord terminates in a standard US NEMA 1-15P plug for direct connection to standard 120V two-prong outlets. A battery indicator eyelet M8 is included in the box, enabling connection of an optional battery indicator panel for visible charge status without opening the VictronConnect app. Optional accessories include clamps, a wall mount bracket, rubber bumper, carry case, and a 2-meter extension cable for added installation flexibility.

Technical Specifications: