Description
The Sun Xtender PVX-6240T is a 2-volt valve-regulated lead-acid (VRLA) AGM deep-cycle solar battery cell designed for large-scale stationary battery banks in off-grid and grid-tied solar and wind energy storage systems, commercial and industrial installations, telecom central office backup, SCADA and RTU infrastructure, island power systems, and wind energy storage applications.
A division of Concorde Battery Corp. — an industry pioneer in VRLA-AGM battery design since 1987 — Sun Xtender engineered the PVX-6240T on the BCI Group 27 platform, making it the only 2-volt cell in the Sun Xtender lineup housed in this case size.
At 624Ah at the 24-hour rate, the PVX-6240T offers a shorter length profile than the Group 31 2V cells — 12.01 inches vs. 12.90 inches — providing a practical solution for battery cabinet and rack designs where the full Group 31 length cannot be accommodated but maximum per-cell capacity remains the priority.
Key Features:
- Unique Group 27 / 2V Cell Platform — The only 2-volt cell in the Sun Xtender lineup in the Group 27 form factor; at 12.01 inches length, it is shorter than the Group 31 2V cells while delivering 624Ah at the 24-hour rate — purpose-built for enclosure and rack designs where Group 31 length is a constraint but high per-cell capacity is required
- 4 M8 Terminals — 2 Front, 2 Farside — Features 4 copper alloy M8 threaded insert terminals — 2 on the front face and 2 on the far side — enabling flexible series string interconnection in multi-cell stationary battery bank configurations; all terminals supplied with silicon bronze bolts, nuts, and washers
- Pure Lead Calcium Grid Construction — Plates are thicker than industry standard for longer cycle life, increased reliability, and greater power output; low impedance AGM design allows excellent charge acceptance with no current limit required when using controlled voltage charging
- PolyGuard® Microporous Polyethylene Separators — Proprietary dual-layer insulation protection shields positive plates against shorting, shock, and vibration; a Sun Xtender exclusive feature not offered by any other manufacturer in the industry
- Non-Spillable VRLA-AGM Design — Valve-regulated, maintenance-free construction means no water replenishment ever; non-spillable design allows the battery to be used upright, on its end, or on its side without risk of electrolyte leakage — enabling safe installation in enclosed battery cabinets without the forced ventilation systems required by conventional flooded 2V stationary cells
- High-Impact Copolymer Polypropylene Enclosure — Battery cover and container uniquely molded with reinforced copolymer polypropylene featuring thick end walls to prevent bulging under pressure; built to withstand the demands of rugged commercial, industrial, and large-scale stationary energy storage environments
- Hazmat Exempt Shipping — All Sun Xtender batteries ship Hazmat Exempt, simplifying logistics for distributors, dealers, and end users across all shipping channels
The PVX-6240T delivers 624Ah of nominal capacity at the 24-hour rate and scales up to 710Ah at the 100-hour rate, making it well suited for the slow, sustained discharge cycles typical of large stationary off-grid solar storage arrays and commercial backup power applications. At the 1-hour rate the battery delivers 390Ah per cell, confirming its ability to supply very high current for shorter duration loads in large inverter and UPS systems. The low impedance AGM construction ensures excellent charge acceptance across the full range of charge rates with no current limit required when using a properly regulated charge source — a critical advantage in large commercial solar and wind systems where charge current varies significantly throughout the day.
Sun Xtender's proprietary PolyGuard® separator system provides a level of plate protection not available from competing AGM battery manufacturers, directly contributing to the PVX-6240T's long cycle life and resistance to vibration and shock loads common in commercial and industrial stationary installations. As a 2-volt cell, the PVX-6240T is assembled in series strings to achieve any desired system voltage — 6 cells yield 12V, 12 cells yield 24V, and 24 cells yield 48V — with the full 624Ah capacity available at every voltage. At 65 lbs, the Group 27 PVX-6240T is a manageable single-person lift, easing the logistics of assembling and servicing large multi-cell stationary battery banks. All Sun Xtender batteries ship Hazmat Exempt, eliminating the regulatory complexity and additional freight costs associated with non-exempt lead-acid battery shipments.
Technical Specifications:
| Specification | Details |
|---|---|
| Model Number | PVX-6240T |
| Battery Type | VRLA (Valve-Regulated Lead-Acid) |
| Technology | AGM (Absorbed Glass Mat) |
| Voltage | 2V |
| Industry Reference Group | Group 27 |
| Cells Per String | 6 cells = 12V · 12 cells = 24V · 24 cells = 48V |
| Capacity — 1 Hr. Rate | 390Ah |
| Capacity — 2 Hr. Rate | 492Ah |
| Capacity — 4 Hr. Rate | 510Ah |
| Capacity — 8 Hr. Rate | 558Ah |
| Capacity — 24 Hr. Rate | 624Ah |
| Capacity — 100 Hr. Rate | 710Ah |
| All Capacity Ratings | @ 25°C (77°F) to 1.75V per cell |
| Terminal Type | 4 × M8 copper alloy threaded insert — 2 front face, 2 farside; SAE automotive post (optional, factory-installed) |
| Hardware Included | Silicon bronze bolts, nuts, and washers |
| Grid Construction | Pure lead calcium |
| Separator | PolyGuard® Microporous Polyethylene |
| Enclosure Material | High-impact reinforced copolymer polypropylene |
| Mounting Orientation | Any (upright, on end, or on side) |
| Hazmat Shipping | Exempt |
| Dimensions (l x w x h) | 12.01 x 6.60 x 8.93 in (305.1 x 167.6 x 226.7 mm) |
| Maximum Weight | 65 lbs (29.5 kg) |
| Manufacturer | Sun Xtender (a division of Concorde Battery Corp.) |

