S-5-Z Mini Clamp Non-Penetrating Standing Seam Clamp for Round Bulb Seams, Light to Medium Duty

S-5

Price:
Sale price$9.75

Customers rate us 4.7/5 based on 511 reviews.

Description

Wrapping securely around round bulb standing seams of 7/8" (22 mm) or less, the S-5-Z Mini attaches solar racking and roof accessories to metal roofs with no roof penetration, using a single stainless steel 3/8-24 round-point setscrew to lock onto the seam.

Key Features

  • Non-Penetrating Attachment: The round-point setscrew dimples the seam without puncturing it, so the roof panel is never drilled and the watertight skin stays intact.
  • Round Bulb Seam Design: The clamp fits Zip-Rib, BEMO, Kalzip and similar bulb-type seams of 7/8" (22 mm) or less.
  • Single Setscrew Installation: One 3/8-24 × 0.80" stainless steel setscrew tightens the clamp, and a bit tip is supplied for use with an electric screw gun.
  • Dual Threaded Mounting Holes: The top face is tapped for M8-1.25 and 3/8-24 hardware, which suits most rail and accessory mounts.
  • Corrosion-Resistant Construction: The body is 6061-T6 aluminum and the hardware is stainless steel, so it holds up over long outdoor service.

The compact body gives installers a low-profile attachment point that sits tight against the roof. It is shorter than the standard S-5-Z and suits light to medium duty mounting, such as utility and accessory attachments.

Tighten the setscrew to 160–180 in-lb on 22 ga steel, or 130–150 in-lb on other metals and thinner steel gauges, using a calibrated torque wrench. Re-tension as the seam compresses. Mount the rail or accessory with an M8-1.25 × 16 mm hex flange bolt, sold separately.

S-5! tests Mini clamps for pull-up (negative load normal to the seam) only. Parallel-to-seam testing is still in progress. Do not use the Mini with SnoRail, SnoFence or ColorGard. It may be used with RamGard unitized snow guards. Confirm project loads with the manufacturer.

Item Specification
Model S-5-Z Mini
Seam Type Round bulb standing seam (Zip-Rib, BEMO, Kalzip and similar)
Seam Size 7/8" (22 mm) or less
Attachment Method Non-penetrating, one setscrew
Setscrew 3/8-24 × 0.80" stainless steel round-point setscrew, quantity 1
Clamp Body Material 6061-T6 aluminum
Hardware Material Stainless steel
Threaded Holes M8-1.25 and 3/8-24
Accessory Bolt M8-1.25 × 16 mm stainless hex flange bolt (13 mm socket), sold separately
Setscrew Torque 160–180 in-lb (22 ga steel); 130–150 in-lb (other metals and thinner steel)
Tested Loading Pull-up (negative load normal to seam) only
Not Compatible With SnoRail, SnoFence, ColorGard
Weight (shipped parts) 0.30 lbs (clamp 0.248 + insert 0.017 + setscrew 0.0345, S-5! drawing estimates)
Weight (with M8 bolt) 0.329 lbs (adds 0.0295 lb bolt)

Specs & Info

You may also like

Recently viewed