Description
Clinching onto vertical-folded seams without piercing the panel, the S-5-V Mini is a compact 6061-T6 aluminum clamp that attaches light to medium-duty solar PV and utility accessories at a lower cost than larger clamps.
Key Features
- Non-Penetrating Attachment: The clamp grips the seam without piercing the panel, helping preserve the roof finish and warranty.
- Single T-30 Setscrew: One Torx round-point setscrew tightens the clamp, and a bit tip is included.
- Vertical Seam Fit: Fits vertical, mechanically folded seams, the same seams as the S-5-U Mini, including most structural and architectural profiles.
- Compact Size: It’s smaller and lighter than the standard S-5-V, suited to signs, conduit, satellite dishes and small solar accessories.
- Domestic Content: One reseller says it may qualify for the Domestic Content Bonus Credit when used per IRS provisions.
The Mini is for light and medium-duty work, and the standard S-5-V is the choice for heavier-duty loads. Installation is simple: place the clamp on the seam, tighten the setscrew, and attach accessories with an M8 bolt.
It is not for face-fastened trapezoidal or corrugated panels, or thru-fastened roofs. Horizontal-seam profiles need a different clamp.
Technical Specification
| Item | Specification |
|---|---|
| Model | S-5-V Mini |
| Clamp Body Material | 6061-T6 aluminum |
| Hardware Material | Stainless steel |
| Compatible Seams | Vertical, mechanically folded standing seams |
| Setscrew | 1 × 3/8-24 × 0.800" round-point, T-30 Torx drive |
| Threaded Holes | M8-1.25 (bolt), 3/8-24 (setscrew) |
| Bolt | M8-1.25 × 16 mm hex flange, 13 mm socket |
| Included Hardware | 1 setscrew, 1 bit tip; bolt sold separately |
| Incompatible Roof Metal | Copper |
| Dimensions | 1.50" × 1.18" × 1.50" |
| Weight | 0.24 lbs |

