Description
Locking onto vertical-folded standing seams with two 3/8-24 stainless steel round-point setscrews, the S-5-V attaches solar rails, snow retention and rooftop accessories to metal roofs with no roof penetration, and ships complete with its M8 hardware.
Key Features
- Non-Penetrating Attachment: The round-point setscrews dimple the seam without piercing it, so the roof panel is never drilled and the watertight skin stays intact.
- Vertical Seam Fit: The clamp fits most vertical-folded structural and architectural standing seam profiles made in North America.
- Two-Setscrew Grip: Two 3/8-24 × 0.80" stainless steel setscrews clamp the seam, and a bit tip is supplied for use with an electric screw gun.
- Bolt Included: One M8-1.25 × 16 mm stainless steel hex flange bolt ships with the clamp for attaching rails and accessories.
- Aluminum Construction: The body is 6061-T6 aluminum, and all included hardware is stainless steel for long outdoor service.
The compact, one-piece body gives installers a secure attachment point at a lower cost than the S-5-U for compatible vertical seams. It is designed to work with S-5! snow retention products such as ColorGard.
Slide the clamp onto the seam and tighten both setscrews to 160–180 in-lb on 22 ga steel, or 130–150 in-lb on other metals and thinner steel. Re-tension as the seam compresses.
S-5! load-tests the clamp to failure on most major brands and profiles and publishes the reports on its website. It is not recommended for copper roofing. Confirm project loads with the manufacturer.
| Item | Specification |
|---|---|
| Model | S-5-V |
| Seam Type | Vertical-folded standing seam |
| Attachment Method | Non-penetrating, two setscrews |
| Setscrews | 3/8-24 × 0.80" stainless steel round point, quantity 2 |
| Bolt | M8-1.25 × 16 mm stainless steel hex flange bolt (13 mm socket), quantity 1 |
| Body Material | 6061-T6 aluminum |
| Hardware Material | Stainless steel |
| Threaded Holes | M8-1.25 (accessory), 3/8-24 (setscrews) |
| Setscrew Torque | 160–180 in-lb (22 ga steel); 130–150 in-lb (other metals and thinner steel) |
| Overall Length | 2.00" (50.8 mm) |
| Weight | 0.38 lbs (0.382 lbs total: clamp 0.313 + 2 setscrews 0.034 + bolt 0.0345, S-5! estimates; 173.3 g per reseller listing) |
| Included | Clamp, 2 setscrews, M8 bolt, bit tip |
| Not Compatible With | Copper roofing |

