Description
Fitting roughly 85% of North American standing seam profiles, the S-5-U is a universal structural aluminum clamp that grips the seam without piercing the panel.
Key Features
- Universal Fit: Fits most structural and architectural vertical seams. Rotated 90 degrees, it also fits many horizontal 2" seam profiles.
- Non-Penetrating: Round-point setscrews dimple the seam to maximize holding strength without piercing the panel, helping preserve roof warranties.
- Two T-30 Setscrews: Torx-drive setscrews tighten with common tools, and a bit tip for electric screw guns is included in every box.
- Tested Strength: The clamp was load-to-failure tested on most major brands and profiles of standing seam roofing.
- Accessory Ready: A bolt is included for attaching snow guards, solar rails, walkways and other equipment.
Holding capacity varies by load direction, seam profile, roof material and clamp model, from ±300 lbs (235 kg) to ±4,000 lbs (1,800 kg). Some applied-cap architectural seams may test lower than integrated seam profiles.
Compatible seams include double-folded standing seam and traditional wood-backed batten seam folded joints. Horizontal seams under 0.65" are not suitable for this clamp.
The clamp is not for face-fastened trapezoidal or corrugated panels, thru-fastened roofs, or hollow batten seam panels. It works with most roofing metals except copper, with stainless steel hardware throughout.
Technical Specification
| Item | Specification |
|---|---|
| Model | S-5-U |
| Clamp Body Material | Structural aluminum |
| Hardware Material | Stainless steel |
| Compatible Seams | Vertical standing seams; many horizontal seams when rotated 90° |
| Min Horizontal Seam | 0.65" |
| Setscrews | 2 × round-point, T-30 Torx drive |
| Included Hardware | 2 setscrews, 1 accessory bolt, 1 bit tip |
| Setscrew Torque, 22 ga Steel | 160–180 in-lb |
| Setscrew Torque, Other Metals and Thinner Steel | 130–150 in-lb |
| Holding Capacity | ±300 to ±4,000 lbs (varies by load direction, seam, metal) |
| Incompatible Roof Metal | Copper |
| Dimensions | 1.5" × 1.5" × 2.0" (reseller-listed) |
| Weight | 0.4 lbs |

