S-5-T Clamp Non-Penetrating Standing Seam Metal Roof Clamp for T-Shaped Seam Profiles

S-5

Price:
Sale price$10.87

Customers rate us 4.7/5 based on 511 reviews.

Description

Latching over the top of T-shaped standing seams without piercing the panel, the S-5-T is a two-piece 6061-T6 aluminum clamp for heavy-duty attachments such as snow retention and ancillary equipment.

Key Features

  • Two-Piece Design: The clamp installs over the top of the seam at any location, with an insert and a finger-grip tail for positioning.
  • Non-Penetrating: Round-point setscrews dimple the seam without piercing it, which leaves roof warranties intact.
  • Two T-30 Setscrews: Torx setscrews tighten with common tools, and a bit tip is included for electric screw guns.
  • Load-Certified: Tested parallel to the seam (drag), with holding capacity from ±300 lbs (235 kg) to ±4,000 lbs (1,800 kg) depending on load direction, seam profile, roof material and clamp model.
  • Accessory Ready: An M8 bolt is included for attaching snow retention and other ancillary items.

Compatible seams include McElroy Metal 138T and 238T, Centria SRS 2 and SRS 3, Imetco Series 300, GreenSpan RidgeLine, Metal Sales T-Armor and similar profiles. They also include architectural single-fold and horizontal seams, and traditional wood-backed batten seam folded joints.

The clamp fits T-shaped seams with a horizontal dimension up to 1.3" (33 mm). For angle-seam and horizontal profiles, the limit is 5/8" (15 mm). Applied-cap architectural seams may test lower than integrated seam profiles.

The clamp is not for face-fastened trapezoidal or corrugated panels, thru-fastened roofs or hollow batten seam panels. It is certified to ICC-ES, FPA HVHZ, IAPMO/UES and UL2703.

Technical Specification

Item Specification
Model S-5-T
Clamp Body Material 6061-T6 aluminum
Hardware Material Stainless steel
Compatible Seams T-shaped, up to 1.3" (33 mm) horizontal dimension
Angle-Seam and Horizontal Limit 5/8" (15 mm)
Setscrews 2 × 3/8-24 × 0.80" round-point, T-30 Torx drive
Bolt M8-1.25 × 16 mm hex flange bolt, 1 included
Threaded Holes M8-1.25 and 3/8-24
Included Hardware 2 setscrews, 1 bolt, 1 bit tip
Setscrew Torque, 22 ga Steel 160–180 in-lb
Setscrew Torque, Other Metals and Thinner Steel 130–150 in-lb
Holding Capacity ±300 to ±4,000 lbs (varies by load direction, seam, metal)
Incompatible Roof Metal Copper
Certifications ICC-ES, FPA HVHZ, IAPMO/UES, UL2703
Weight 0.49 lbs

Specs & Info

You may also like

Recently viewed