Description
Interlocking with vertical snap-together seams and single-fold seams under 0.54" (13 mm), the S-5-S Mini attaches signs, walkways, conduit and solar arrays to metal roofs with no roof penetration, using one stainless steel 3/8-24 round-point setscrew.
Key Features
- Non-Penetrating Attachment: The round-point setscrew grips the seam without piercing it, so the roof panel is never drilled and the watertight skin stays intact.
- Snap-Together and Single-Fold Fit: The clamp suits vertical snap-together profiles and single-fold horizontal seams with a projection under 0.54" (13 mm).
- Single Setscrew Installation: One 3/8-24 × 0.800" stainless steel setscrew tightens the clamp, and a bit tip is supplied for use with an electric screw gun.
- Threaded Accessory Mounting: An M8-1.25 threaded hole on top accepts the accessory bolt, so rails and equipment mount directly to the clamp.
- Compact Aluminum Body: The 6061-T6 aluminum body is smaller and lighter than the standard S-5-S, which keeps cost and weight down for utility attachments.
The compact body gives installers a low-profile attachment point for light and medium duty loads. It works with RamGard unitized snow guards.
Tighten the setscrew to 160–180 in-lb on 22 ga steel, or 130–150 in-lb on other metals and thinner steel, using a calibrated torque wrench. Re-tension as the seam compresses.
S-5! tests Minis for pull-up only, and parallel-to-seam strength is not certified. Do not use with face-fastened trapezoidal or corrugated panels, thru-fastened roofs, hollow batten seams, SnoRail or SnoFence. Confirm project loads with the manufacturer.
Technical Specification
| Item | Specification |
|---|---|
| Model | S-5-S Mini |
| Seam Type | Vertical snap-together; single-fold horizontal under 0.54" (13 mm) |
| Attachment Method | Non-penetrating, one setscrew |
| Setscrew | 3/8-24 × 0.800" stainless steel round point, quantity 1 |
| Body Material | 6061-T6 aluminum |
| Hardware Material | Stainless steel |
| Threaded Holes | M8-1.25 and 3/8-24 |
| Accessory Bolt | M8-1.25 × 16 mm stainless hex flange bolt (13 mm socket), sold separately |
| Setscrew Torque | 160–180 in-lb (22 ga steel); 130–150 in-lb (other metals and thinner steel) |
| Tested Loading | Pull-up (negative load normal to seam) only |
| Compatible With | RamGard unitized snow guards |
| Not Compatible With | SnoRail, SnoFence, face-fastened trapezoidal or corrugated panels, thru-fastened roofs, hollow batten seam panels |
| Weight (shipped parts) | 0.21 lbs (clamp 0.1925 + setscrew 0.017, S-5! drawing estimates) |
| Weight (with bolt) | 0.244 lbs (adds 0.0345 lb bolt) |
| Included | Clamp, setscrew, bit tip |
| Not Included | M8 bolt (sold separately) |

