Description
Spanning the crown of a trapezoidal rib, the S-5! RibBracket III is a structural aluminum attachment bracket with a factory-applied EPDM gasket, a slotted M8 top hole and four pre-punched attachment points.
Key Features
- Sheeting-Only Attachment: Mounts directly on the rib crown, so it can be placed anywhere along the rib.
- Factory EPDM Gasket: The pre-applied gasket and UV-shielding reservoir weatherproof the bracket with no field-applied sealants.
- Angled Design: The angled attachment converts wind uplift into shear instead of pull-out.
- Slotted Top Hole: The hole accepts standard M8 nuts and bolts, allowing lateral adjustment to square up modules.
- Flex-to-Fit Legs: The legs bend inward to fit varying rib profiles, and the channel above the rib doubles as wire management.
The RibBracket III is the higher-profile option, recommended with the S-5! PVKIT for rail-less solar mounting when extra height is needed. It also mounts microinverters, module-level electronics and other accessories.
It is designed for trapezoidal profiles with a 1" to 1-3/8" (25 to 35 mm) top rib width, including PBR-Panel, R-Panel and Kirby Roof (KR). It is not recommended for lapped ribs or for use with rails.
Install by wiping the rib clean, setting the bracket on the crown, and fastening through all four pre-punched holes with the supplied stainless-capped self-piercing screws. Using every hole is required to reach the tested strength.
Technical Specification
| Item | Specification |
|---|---|
| Model | RibBracket III |
| Material | Structural aluminum |
| Gasket | Factory-applied EPDM with UV-shielding reservoir |
| Top Rib Width | 1" to 1-3/8" (25 to 35 mm) |
| Roof Type | Exposed-fastened trapezoidal-rib metal roofs |
| Attachment | Sheeting only, 4 attachment points |
| Top Hole | Slotted, accepts M8 bolt or nut |
| Included Hardware | 4 × stainless-capped self-piercing screws with EPDM sealing washers, 1 × M8 nut |
| Lapped Ribs | Not recommended |
| Certification | Sunnova AVL |
| Weight | 0.25 lbs |

