Description
Clamping solar modules directly to metal roofs without rails or roof penetrations, the S-5! PVKIT 2.0 ships pre-assembled to cut installation time and cost. It is UL 2703 listed and works with standing seam, trapezoidal, and corrugated roof profiles when paired with the matching S-5! clamp or bracket.
Key Features
- Rail-Less, Zero Penetration: The kit attaches modules directly to the roof clamp, so no rails or roof penetrations are needed and the roof manufacturer’s warranty stays intact.
- Pre-Assembled Design: A thread-locked standoff bolt lets one tool drive the top bolt, and a low-profile bolt head with a bit included gives a flush finish.
- Aggressive Bonding Teeth: Improved teeth create a stronger ground path, so no lugs or wire are needed except to ground the system and connect strings.
- Wide Module Compatibility: One kit fits module frames from 33 to 46 mm (1.30 to 1.81 in) thick.
- 1-Inch Module Gap: The gap between modules allows wind load reduction per ASCE 7.
The kit ships pre-assembled with either a MidGrab or an EdgeGrab. A thread-locked standoff bolt lets one tool drive the top bolt, removing steps from the original kit.
MidGrab clamps two adjacent modules in mid-array conditions, while EdgeGrab handles array ends. A module placement bevel guide and wire tie-off slots speed up installation.
The attachment clamp is sold separately. Pair it with an S-5! mini clamp for most standing seam roofs, or an S-5! bracket for exposed-fastener and corrugated roofs.
Kit Options
| Option | Position in Array | Function |
|---|---|---|
| EdgeGrab | Array ends | Single-piece design that grips one module edge |
| MidGrab | Between modules | Grips two adjacent modules and leaves a 1" gap |
| Finish | Standard | Non-corrosive aluminum and stainless steel |
| Finish | Black | Special order only |
Technical Specification
| Item | Specification |
|---|---|
| Model | S-5-PV Kit 2.0 |
| Brand | S-5! |
| Mounting Style | Rail-less, zero penetration |
| Grab Types | EdgeGrab, MidGrab |
| Compatible Module Frame Thickness | 33 to 46 mm (1.30 to 1.81 in) |
| Module Gap | 1 in |
| Material | Aluminum and stainless steel |
| Standard Finish | Mill aluminum |
| Optional Finish | Black (special order) |
| Standing Seam Roofs | With S-5! mini clamps (sold separately) |
| Exposed-Fastener / Corrugated Roofs | With S-5! brackets (sold separately) |
| Grounding | Integrated bonding teeth |
| Listing | UL 2703 |
| Included | Pre-assembled kit with standoff bolt, hex bit, and module placement bevel guide |
| Not Included | S-5! roof clamp or bracket |
Specs & Info