S-5-E Mini Clamp Non-Penetrating Standing Seam Clamp for Double-Fold Roofs, Light to Medium Duty

S-5

Price:
Sale price$4.76

Customers rate us 4.7/5 based on 511 reviews.

Description

Embracing double-fold standing seams with a single stainless steel 3/8-24 round-point setscrew, the S-5-E Mini attaches solar arrays, walkways and conduit to metal roofs with no roof penetration, at an estimated assembly weight of only 66 grams.

Key Features

  • Non-Penetrating Attachment: The round-point setscrew grips the seam without piercing it, so the roof panel is never drilled and the watertight skin stays intact.
  • Single Setscrew Design: One 3/8-24 × 0.500" stainless steel setscrew tightens the clamp, and a bit tip is supplied for use with an electric screw gun.
  • Dual Threaded Mounting Holes: The top face is tapped for M8-1.25 and 3/8-24 hardware, which suits most accessory and rail connections.
  • Compact Aluminum Body: The 6061-T6 aluminum body is shorter than the standard S-5-E, which keeps weight low for lighter duty attachments.
  • Broad Application Range: The clamp suits medium-duty mounting of signs, walkways, solar arrays and conduit, and it works with RamGard unitized snow guards.

The lightweight body gives installers a low-profile, economical attachment point for loads where full S-5-E holding strength is not required.

Tighten the setscrew to 160–180 in-lb on 22 ga steel, or 130–150 in-lb on other metals and thinner steel, using a calibrated torque wrench. Re-tension as the seam compresses.

For critical attachments, use an M8-1.25 × 16 mm stainless hex flange bolt, sold separately, tightened to 160 in-lb. S-5! tests the Mini for pull-up only, so confirm project loads with the manufacturer.

Item Specification
Model S-5-E Mini
Seam Type Double-fold standing seam (European style)
Attachment Method Non-penetrating, one setscrew
Setscrew 3/8-24 × 0.500" stainless steel round point, quantity 1
Body Material 6061-T6 aluminum
Hardware Material Stainless steel
Threaded Holes M8-1.25 and 3/8-24
Recommended Bolt M8-1.25 × 16 mm stainless hex flange bolt (13 mm socket), sold separately
Setscrew Torque 160–180 in-lb (22 ga steel); 130–150 in-lb (other metals and thinner steel)
Bolt Torque 160 in-lb (critical attachments)
Tested Loading Pull-up (negative load normal to seam) only
Compatible With RamGard unitized snow guards
Not Compatible With SnoRail, SnoFence, ColorGard
Weight (shipped parts) 0.11 lbs (clamp 46.27 g + setscrew 4.54 g = 50.81 g, S-5! drawing estimates)
Weight (with bolt) 0.147 lbs (66.46 g, adds 15.65 g bolt)
Included Clamp, setscrew, bit tip

Specs & Info

You may also like

Recently viewed