Description
Cinching onto traditional double-folded seams, the S-5-E is an economical structural aluminum clamp with two round-point setscrews, a strength comparable to the S-5-U and S-5-V at a lower cost.
Key Features
- Non-Penetrating Attachment: Patented round-point setscrews secure the clamp to the seam without piercing the panel.
- Double-Fold Fit: Fits traditional 1" and most 1.5" tall European-style double-folded standing seam profiles with a seam fold under 1/2" (13 mm).
- Butler MR-24 Compatible: Also fits Butler’s MR-24 profile.
- Torx-Drive Setscrews: Two T-30 Torx round-point setscrews tighten with common tools, and a bit tip is included.
- Accessory Ready: An M8 bolt is included for attaching snow retention, utilities and other heavy-duty accessories.
The clamp is available for zinc, stainless steel, aluminum and coated steel roofs. It is compatible with most common roofing metals except copper.
Installation is simple. Place the clamp on the seam, tighten the setscrews to the specified tension, then attach accessories with the bolt. For horizontal seams under 1/2" (13 mm), crimp the seam to 180 degrees at the clamp location.
The S-5-E is tested for parallel-to-seam (drag) loads. Its certifications are ICC-ES, FPA HVHZ, IAPMO/UES, UL2703, DIBt and CE.
Technical Specification
| Item | Specification |
|---|---|
| Model | S-5-E |
| Clamp Body Material | Structural aluminum |
| Hardware Material | Stainless steel |
| Compatible Seams | Double-folded standing seam, 1" and most 1.5" tall; Butler MR-24 |
| Max Seam Fold | Under 1/2" (13 mm) |
| Setscrews | 2 × 3/8-24 × 0.80" round-point, T-30 Torx drive |
| Bolt | M8-1.25 × 16 mm hex flange bolt, 1 included |
| Included Hardware | 2 setscrews, 1 bolt, 1 bit tip |
| Setscrew Torque, 22 ga Steel | 160–180 in-lb |
| Setscrew Torque, Other Metals and Thinner Steel | 130–150 in-lb |
| Incompatible Roof Metal | Copper |
| Certifications | ICC-ES, FPA HVHZ, IAPMO/UES, UL2703, DIBt, CE |
| Weight | 0.25 |
