S-5! CorruBracket Low-Profile Bottom-Fixed Bracket for Exposed-Fastened Corrugated Metal Roofs

S-5

Price:
Sale price$8.83

Customers rate us 4.7/5 based on 511 reviews.

Description

Nestling into the low area between corrugations, the S-5! CorruBracket is a compact aluminum bracket with factory-applied butyl sealant, built for snow guards, heavy-duty commercial loads and solar PV mounting.

Key Features

  • Factory Butyl Sealant: Butyl comes pre-applied in the base, so no field sealant is needed, and the patented reservoir conceals it from UV.
  • Over-Compression Protection: The part design prevents over-compressing the sealant as fasteners are tightened.
  • Structure-Mounted: Fastens into the supporting structure for holding strength: wood decking, wood or steel purlins, or trusses.
  • Pre-Punched Holes: Ready-to-fasten holes plus M8-1.25 and M10-1.5 threaded holes on the bracket for attaching accessories.
  • PV Ready: Works with the S-5-PV Kit for direct-attach solar over a wood deck, with railed mounting, and with the ColorGard snow retention system.

The CorruBracket fits exposed-fastened corrugated roofs with 7/8" and 3/4" rib height and a 2.67" (68 mm) rib pitch. It mounts in the low area between ribs.

Installation needs no surface preparation beyond wiping away oil and debris. Peel the release paper, align the bracket, press it in place and fasten with two to four screws chosen for your substrate. Never mount it into the metal roofing alone.

The bracket was load-tested to failure for normal-to-seam (pull-up) and parallel-to-seam (drag) loads on wood decking and on metal and wood purlins. Fasteners are sold separately.

Technical Specification

Item Specification
Model CorruBracket
Material Aluminum (reseller-listed)
Sealant Factory-applied butyl with UV-shielding reservoir
Roof Type Exposed-fastened corrugated metal, 7/8" and 3/4" rib height
Rib Pitch 2.67" (68 mm)
Mounting Location Low area between ribs, into structure
Compatible Substrates Wood decking, wood or steel purlins, trusses
Threaded Holes M8-1.25 and M10-1.5
Fasteners 2 to 4 per bracket, sold separately
Dimensions 2.77" × 2.00" × 1.00" (reseller-listed)
Weight 0.20 lbs

Specs & Info

You may also like

Recently viewed