Sunrotor SR-4 ( 24V) Solar Submersible Pump/Motor Unit
The SR-4 helical rotor submersible water pump offers a broad range of pumping capabilities and is the pride of our SunRotor fleet.
All SunRotor pumps require a SunRotor DC Input Controller to operate properly. Attempting to run our pumps with any other controllers can result in pump failure and will void the warranty on the pump.
The SunRotor DC Input Controller SRC-M100T (our item number SPP-03205) is required in order to operate this pump properly. Running this pump with any other controller can result in pump failure and will void the warranty on the pump.
SunRotor SR-4 Specifications:
Nominal 24 volt operation
Usable voltage range 12-48 volts
Power range 195 watts to 390 watts
Solar, battery or a combination
Maximum functional lift capability of 150 ft (46 m)
Max flow at 100 ft (30 m) is 3.9 gallons/min (14.76 liters/ min) with 202.5 watts and 38.2 volts PV input
Highly reliable, single moving part progressive cavity technology
Readily repairable in the field
3/4 inch FNPT output
Submersion limit of 100 ft below static water level (ex: 100 ft submersion + 50 ft static water level: 150 ft)
19 inches in height (48.3 cm)
3 inch diameter (76 mm) fits 3.5 inch (89 mm) casing
Light weight - 12 pounds (5.4 kg)
Submersible motor protected from ambient water by oil filled jacket (food grade oil protects potable water source if vessel is compromised)
Brushless DC motor technology avoids conventional DC brush maintenance and replacement
All electronics are mounted above ground for longer life and easy access
Entire pump body is stainless steel to comply with all local code and pump installation requirements