12v 30A Diversion Air Heating Load
A divert load is required on systems using any generator or alternator power source to provide a load path for the power when the battery can no longer take any more charge. This load prevents the generator or alternator from overspeeding and also keeps the voltage within safe limits during the Divert stage of the charge process. The ceramic wire wound resistors can be wired in different configurations for different amperage requirements and different voltages.
These units do generate heat and need to be mounted to a non combustible surface.
RES/DVT12-30 is configured for a 12 volt system and will provide a 30 amp load.
RES/DVT12-15 is configured for a 12 volt system and will provide a 15 amp load using only one resistor.
RES/DVT24-15 is configured for a 24 volt system and will provide a 15 amp load using 2 resistors.