Sunrotor SR-6 ( 48V) Solar Submersible Pump/Motor Unit

Sunrotor SR-6 ( 48V) Solar Submersible Pump/Motor Unit

For pumping from greater depths than the SR-4.

The SunRotor DC Input Controller SRC-M100T (our item number SPP-03205) is required in order to operate this pump properly. Running this pump with any other controller can result in pump failure and will void the warranty on the pump.

SunRotor SR-6 Specifications:

Nominal 48 volt operation
Usable voltage range 24-48 volts
Power range 390 watts to 780 watts
Solar, battery or a combination
Maximum functional lift capability of 200 ft (61 m)
Max flow at 100 ft (30 m) is 6.7 gallons/min (25.36 liters/ min) with 397 watts and 76.3 volts PV input
Highly reliable, single moving part progressive cavity technology
Readily repairable in the field
3/4 inch FNPT output
Designed for submersible operation up to 100 ft
3 inch diameter (76 mm) fits 3.5 inch (89 mm) casing
Light weight - 12 pounds (5.4 kg)
Submersion limit of 100 ft below static water level (ex: 100 ft submersion + 50 ft static water level: 150 ft)
Brushless DC motor technology avoids conventional DC brush maintenance and replacement
All electronics are mounted above ground for longer life and easy access
Entire pump body is stainless steel to comply with all local code and pump installation requirements
CE certified
ISO 9001