Sunrotor SR-12 Helical Rotor Solar Pump

SR-12 Helical Rotor Solar Pump

The SR-12 is the largest of the SunRotor Helical Rotor Pumps. It produces a substantually higher volume in the lower lift areas and is cable of handling depths far greater than any helical rotor pump we've sold in the past.

This pump can and must be used with SRC-M200T Solar Pump Controller. Attempting to run our pumps from any other controller can result in pump failure and void the warranty on the pump.

SunRotor SR-12 Specifications:

Nominal 110 volt operation
Usable voltage range 72-110 volts
Power range 570 watts to 1740 watts
Solar, battery or a combination
Maximum functional lift capability of 350 ft (107 m)
Max flow at 100 ft (30 m) is 15.1 gallons/min (57.2 liters/ min) with 793 watts and 141.6 volts PV input
Highly reliable, single moving part progressive cavity technology
Readily repairable in the field
1 inch FNPT output
Designed for submersible operation up to 100 ft
4" diameter (102 mm) fits 4.5" (114 mm) casing
Light weight - 23 pounds (10.4 kg)
Submersion limit of 100 ft below static water level (ex: 100 ft submersion + 50 ft static water level: 150 ft)
Brushless DC motor technology avoids conventional DC brush maintenance and replacement
All electronics are mounted above ground for longer life and easy access
Entire pump body is stainless steel to comply with all local code and pump installation requirements
CE certified
ISO 9001