SolarEdge 320W Power Optimizer - P320-5NM4MRSS
The SolarEdge Power Optimizer is a DC/DC converter which is connected by installers to each PV module, replacing the traditional solar junction box. The SolarEdge power optimizers increase energy output from PV systems by constantly tracking the maximum power point (MPPT) of each module individually. Furthermore, the power optimizers monitor the performance of each module and communicate performance data to the SolarEdge monitoring portal for enhanced, cost-effective module-level maintenance. Each power optimizer is equipped with the unique SafeDC™ feature which automatically shuts down modules' DC voltage whenever the inverter or grid power is shut down. The MPPT per module allows for flexible installation design with multiple orientations, tilts and module types in the same string. When working with SolarEdge Inverters, SolarEdge power optimizers automatically maintain a fixed string voltage, allowing installers even greater flexibility with longer strings and strings of different lengths in order to design optimal PV systems. The SolarEdge power optimizers are compatible with c-Si and thin-film modules and have a 25 year warranty.
FEATURES:
- Ease of installation - simply clip the power optimizer to the module frame or attach to the rail with a single screw
- Only requires equipment grounding - with a single star washer (included) between the optimizer and the racking (grounding lugs not needed)
- For Single Phase Inverters
- Connects one module per optimizer
- Up to 25% more harvested energy from your PV system
- Per-module Maximum Power Point Tracking (MPPT)
- Superior efficiency (99.5% peak efficiency, 98.8% weighted efficiency)
- Mitigates all types of modules mismatch-loss, from manufacturing tolerance to partial shading
- Allows for parallel strings of different lengths or orientations
- Designed for extreme environmental conditions
- Advanced, real-time performance measurement
- Automatic module DC voltage shut-down for installer and firefighter safety. Each optimizer has an internal temperature sensor which detects if it gets over 185 degrees °F - and they shut down, if reached.
- 25 Year Warranty
ELECTRICAL CHARACTERISTICS:
| Max Allowed System Voltage |
1000 Vdc |
| Input Connector (Modules) |
MC4 compatible |
| Output Wire Type/Connector (Optimizers) |
PV Wire / MC4 |
| Output Wire Length |
3 ft (.95 m) |
3 ft (.95 m) |
3.9 ft (1.2 m) |
| Operating Temp Range |
-40 to +85°C / -40 to +185°F |
| Max/Weighted Efficiency |
99.5% / 98.8% |
| Relative Humidity |
0 - 100% |
| Protection Rating |
IP65 / NEMA4 |
| Optimizer String Length (Min- Max) |
8 - 25 |
| Max Power per String |
5250W |
**NOTE: P300/P400 optimizers can be combined in one string. P600/P700 optimizers can be combined in one string. It is not allowed, however, to mix P600/P700 optimizers with P300/P400 optimizers in one string.
