Primus Windpower 27' guyed tower kit for Air Wind Turbines Generators

Primus Windpower 27\' guyed tower kit for Air Wind Turbines Generators

Model: 1-TWA-10-01

Brand: SouthWest Windpower

Price: $310.00 $230.00 

View Additional Datasheet    


Primus Windpower 27' AIR tower kits

AIR tower kits are available in roof mount, 27'; (8.1m) and 45'; (13.5m) heights. These kits are Professional Engineer Certified (PE Certified). Each tower kit comes with all hardware necessary to install a tower, except guy supports, pipe and cement. All parts bolt or clamp together and no welding is required. Roof mounts include vibration isolators, wall brace clamps and a safety leash, but do not include pole or lag screws.

The AIR tower kit includes a simple yet effective elbow/tee for its base. Combined with a short length of tubing this type of base eliminates the need for a concrete pad, base plate and a swivel for the base of the tower. A simple extruded aluminum, coupling clamp allows the use of a wide selection of different kinds of tubing, depending on availability, site requirements and customer preference. Threaded coupling points are eliminated, allowing lighter materials to be used with the same or greater strength than a threaded pipe tower. Pre-cut and swaged guy wires eliminate wire measuring and cutting.
 
Pipe Pieces Needed:
  • 24 foot (7.2 meter) length for tower

  • 3 foot (.9 meter) length for tower

  • 6 foot (1.8 meter) length for tower base

 

 

Description

Item code

AIR Marine tower hardware kit

016-01128

9' AIR Marine aluminum mast and 2 stays

016-01131

Roof kit without roof seal

016-01134

Roof kit with roof seal

016-01137

Roof seal – for roof mount kit

016-01140

27' AIR guyed tower kit (AIR only)

016-01086

45' AIR guyed tower kit (AIR only)

016-01092

36" Auger – set of 4; use with 24' & 27' towers

016-01113

36 Galvanized auger set of 4; for 24' & 27' towers

016-01116

48 Auger set of 4 32' - 50' towers

016-01119

48 Galvanized auger set of 4 32'-50' towers

016-01122

AIR Shutoff/circuit breaker

016-09003

30 amp circuit breaker kit

016-01225

50 amp circuit breaker kit

016-01226

100 amp circuit breaker kit

016-01222

Amp meter kit

016-01223

Stop Switch for Land Versions

016-01351

 

There are currently no product reviews.


  Write Review

  Customers who bought this product also purchased

  Currently Viewing


Air 27' guyed tower kit

  Related Products


Air Wind Turbines & Towers (200W

Primus WindPower 1-ARXM-15-12 Air X Wind Turbine Generator 400W Marine 12vPrimus WindPower 1-ARXM-15-24 Air X Wind Turbine Generator 400W Marine 24vPrimus WindPower 1-ARXM-15-48 Air X Wind Turbine Generator 400W Marine 48vPrimus WindPower 1-ARBM-15-12 160W Air Breeze 12v Marine Wind Turbine GeneratorPrimus WindPower 1-ARBM-15-24 160W Air Breeze 24v Marine Wind Turbine GeneratorPrimus WindPower 1-ARBM-15-48 160W Air Breeze 48v Marine Wind Turbine GeneratorPrimus Windpower 45' guyed tower kit for Air Wind Turbines GeneratorsPrimus Windpower Roof Kit w/ roof seal for Air Wind Turbines GeneratorsPrimus Windpower Roof Kit w/o roof seal for Air Wind Turbines GeneratorsPrimus Windpower Sternmount Air Marine Tower Kit for Air X or Air BreezePrimus Wind Power 9' AIR Marine Aluminum Mast Pole SetPrimus Windpower Air X Air Breeze Wind Turbine Stop SwitchSouthwest WindPower Replacement Blade set for Air X, Land and Marine Wind TurbineSouthwest Windpower Nose Cone for Air-X, Air 403 and Air Breeze Wind TurbinesPrimus Windpower 1-AR30-10-12 Air 30 Land Wind Turbine Generator 12vPrimus Windpower Air 30 Land Wind Turbine Generator 24vPrimus Windpower Air 30 Land Wind Turbine Generator 48vPrimus Windpower 1-AR40-10-48 Air 40 Land Wind Turbine Generator 48vPrimus Windpower Air 40 Land Wind Turbine Generator 24vPrimus Windpower Air 40 Land Wind Turbine Generator 12vMidnite Solar Stop Switch for wind turbinesPrimus 29' EZ tower kit for Air Wind Turbines GeneratorsSouthwest Windpower Face Bearing Kit for Air Land/Marine Wind TurbinesPrimus Windpower Control panel for 12vdc AIR Breeze/40Primus Windpower Control panel for 24vdc AIR Breeze/40Southwest WindPower Replacement Blade set for Air Breeze Wind TurbinePrimus Windpower Control panel for 48vdc AIR Breeze/40

  Related Categories


  Related Manufacturers


SouthWest Windpower

Southwest Windpower 1000 Watt Whisper 200 Wind Turbine Generator 12, 24, 36, 48 VDC w/ Charge Controller and DisplaySouthwest Windpower 900 Watt Whisper 100 Wind Generator 12, 24, 36 or 48 VDC w/o Charge controllerSouthwest Windpower 1000 Watt Whisper 200 Wind Generator 120 volt w/ Charge Controller and DisplaySouthwest Windpower 1000 Watt Whisper 200 Wind Generator 240 volt w/ Charge Controller and DisplaySouthwest Windpower 3000w Whisper 500 24V w/ Charge Controller and DisplaySouthwest Windpower 3000w Whisper 500 48V w/ Charge Controller and DisplaySouthwest Windpower Whisper 500 Windistar 4500 60' Guyed Tower KitPrimus Windpower 27' guyed tower kit for Air Wind Turbines GeneratorsSouthwest Windpower 900 Watt Whisper 100 Wind Generator 12, 24, 36 or 48 VDC with Charge controllerSouthwest WindPower Replacement Blade set for Air X, Land and Marine Wind TurbineSouthwest Windpower Nose Cone for Air-X, Air 403 and Air Breeze Wind TurbinesSouthwest Windpower Whisper 100/200 Charge Controller w/ Display3000w Whisper 500 120V w/ Charge Controller and Display3000w Whisper 500 240V w/ Charge Controller and DisplaySouthwest Windpower Replacement Nose Cone for Whisper 200Southwest Windpower Replacement Blade Set for Whisper 200Southwest Windpower Replacement Tail Fin for Whisper 200Southwest Windpower 1000 Watt Whisper 200 Wind Turbine Generator 12, 24, 36, 48 VDC NO Charge ControllerSouthwest Windpower Replacement Blade Set for Whisper 100Southwest Windpower 1000 Watt Whisper 200 Wind Generator 240 volt w/ NO Charge ControllerSouthwest Windpower Whisper 500 Replacement Spindle O8Southwest Windpower Whisper 500 Replacement Nose Cone U23Southwest Windpower Whisper 200 Replacement Pivot Shaft Kit includes pivot shaft, bushing and hardwareSouthwest Windpower Whisper 200 Replacement Brush Kit includes, brushes, holder and hardwareSouthwest Windpower Whisper 200 Replacement Blade ExtendersSouthwest Windpower Whisper 200 Replacement Nose Cone & Hardware F19Southwest Windpower Whisper 200 Replacement Yaw shaft Bearing Assembly & HardwareSouthwest Windpower Whisper 200 Replacement Complete Upper Head AssemblySouthwest Windpower 1000 Watt Whisper 200 Wind Generator 120 volt w/ NO Charge ControllerSouthwest Windpower Whisper 200 Replacement Rotor Can w/ Magnets Balanced & Hardware E15Primus 29' EZ tower kit for Air Wind Turbines GeneratorsSouthwest Windpower Whisper 200 Replacement Sealed Bearing 6204 (4 Bearings Required Per Turbine)Southwest Windpower Whisper 500 Replacement Blade Set with Blade Strap & Fastners Y29Southwest Windpower Luminous RE Whisper 500 48V Charge Controller w/o Dump Load Z30Southwest Windpower Whisper 200 Replacement Complete Lower Head AssemblySouthwest Windpower Whisper 200 Brake SwitchSouthwest Windpower Face Bearing Kit for Air Land/Marine Wind TurbinesSouthwest Windpower Luminous RE Whisper 500 Dump Load 24 or 48vSouthwest Windpower Luminous RE Whisper 500 Yaw Shaft with BearingsSouthwest Windpower Luminous RE Whisper 500 Rotor Can w/ magnets and blade plateSouthwest Windpower Luminous RE Whisper 500 Spindle and Bearing AssemblySouthwest Windpower Whisper 500 Replacement Tail SpringSouthwest Windpower Luminous RE Whisper 500 24V Charge Controller w/o Dump Load Z30Southwest Windpower Whisper 500 Sealed Bearing 6207-2RSSouthwest Windpower Whisper 500 Furl Spring Mandril AssemblySouthwest Windpower Luminous RE Whisper 500 Brush KitSouthwest Windpower Whisper 200 Replacement Tower Insert Kit and hardwareSouthwest WindPower Replacement Blade set for Air Breeze Wind TurbineSouthwest Windpower Replacement Tail Boom for Whisper 200Southwest Windpower Whisper 500 Replacement Sealed Yaw Bearing 6910 (2 Bearings Required Per Turbine)Southwest Windpower Whisper 500 Replacement Tail Fin w/HWSouthwest Windpower Whisper 500 Replacement Tower InsertSouthwest Windpower Whisper 100/200 65' Guyed Tower Kit no Earth AugersSouthwest Windpower Whisper 100/200 Replacement Spindle and Bearing AssemblySouthwest Windpower Whisper 100 Blade Bolt Hardware KitSouthwest Windpower Whisper 100 Replacement blade Strap SetSouthwest Windpower Replacement Single Blade for Whisper 200Southwest Windpower Whisper 500 Upper Head AssemblySouthwest Windpower Whisper 500 Lower Head Assembly
Twitter
Stumbleupon
Reddit
Pintrest
Newsvine
Linkedin
Google+
Google
Facebook
Digg

QUOTE

  ME

Quote Request