Midnite Solar Pre Wired SMA Sunny Island-6048 120/240 vac Inverter for Off grid or Battery based Grid Tie. 6000 watt 48 volt inverter.
|MidNite Solar pre-wired inverter systems offer a turn key solution to installing a battery based inverter system, saving you time in the field. With a pre-wired solution all of the confusion is taken out of selecting all the right parts. This system uses the SMA Sunny Island inverter that is rated at 6,000 watts and uses a 48 volt battery. It produces 120/240 volts AC and has a single AC input. MidNite does offer an automatic transfer relay that can be installed in the E-panel that will allow the Sunny Island to automatically select between two AC inputs (For example the grid or generator). Dont forget to look at our other products that compliment the pre-wired inverter system like our Battery Boxes or Disconnecting Combiners. Our pre wired systems can be configured in about any way needed with any of the common battery based inverters (except Outback). Please contact us for a quote if the System you need is not listed. Below is a simple list of the major components included in the system.
1 - SMA Sunny Island Pre-Wired 6048 120 vac Inverter with Midnite Autoformer for 120/240 vac Off Grid
1 - MNX-240 Autoformer MidNite Autoformer
1 - MNE250SMA E-Panel
1 - AC Bypass Assembly
1 - Classic 150 charge controller with DC-GFP (Ground Fault protection) and Arc Fault protection built in.
2 - MNSPD300’s (Surge Protection Devices)
1 - 250 amp Battery Main Breaker for the Sunny Island
General labor for assembly, test and crating included
Truck Freight Only
|| Pre Wired SMA Sunny Island-6048 120/240 vac Inverter for Off grid.
6000 watt 48 volt inverter.
AC Bypass Assembly included
Classic 150 installed.
Listed by ETL for US & Canada.
||65.5" T x 26.75" W x 11.5" D
||1 Crate 71.5" L x 28" W x 19" D "truck freight only"
||Actual-310, Shipping-385 Lbs Lbs
| System Options
MNSI6048-240V-CL150-SMARB -- $11,680.00Auto transfer relay board to select between two AC INPUT sources. (SMARB)
Charge Controller options
For help sizing the Classic’s please try our String Sizing tool
MNSI6048-240V-CL200 -- $11,301.00 With Classic 200 and high voltage input breakers instead of a Classic 150
MNSI6048-240V-CL250 -- $11,401.00 With Classic 250 and high voltage input breakers instead of a Classic 150
Adding a second Classic to this system
The second Classic will include Left hand mounting bracket, SPD300, 2 DC breakers and Wiring
MNSI6048-240V-2CL150 -- $12,394.00 With 2 Classic 150’s total
MNSI6048-240V-2CL200 -- $12,436.00 With 2 Classic 200’s total and high voltage input breakers
MNSI6048-240V-2CL250 -- $12,636.00 With 2 Classic 250’s total and high voltage input breakers