DPW Standard Roof/Ground Mounts
DPW Standard Roof/Ground Mounts
Power-Fab Roof/Ground Mounts are available in several sizes and styles. In addition to the standard configuration, both low-profile and two-tier designs are available. Unless otherwise indicated, the rails and legs are mill-finish 6061-T6 structural aluminum angle (AL), and have adjustable, telescoping back legs (TL). Anodized or powder coated finishes are abailable at an additional cost.
POWER-FAB Standard Roof/Ground Mounts (SRGM)
Standard Roof/Ground Mounts are made from 6061-T6 structural aluminum extrusions with a mill finish and have adjustable, telescoping back legs. Modules are mounted in landscape orientation and stacked one above the other up to 4 or 5 high, depending on module width. Multiple Standard Roof/Ground Mounts may be installed side-by-side.
Use the Module Series Sizing Chart at the bottom of the page to determine module series.
Module size | Number of modules | |||||
1 | 2 | 3 | 4 | 5 | ||
B |
DPW Part # |
SRGM1-B |
SRGM2-B |
SRGM3-B |
SRGM4-B |
SRGM5-B |
Item Code |
013-14201 |
013-14202 |
013-14203 |
013-14204 |
013-14205 |
|
C |
DPW Part # |
SRGM1-C |
SRGM2-C |
SRGM3-C |
SRGM4-C |
SRGM5-C |
Item Code |
013-14301 |
013-14302 |
013-14303 |
013-14304 |
013-14305 |
|
D |
DPW Part # |
SRGM1-D |
SRGM2-D |
SRGM3-D |
SRGM4-D |
SRGM5-D |
Item Code |
013-14401 |
013-14402 |
013-14403 |
013-14404 |
013-14405 |
|
E |
DPW Part # |
SRGM1-E |
SRGM2-E |
SRGM3-E |
SRGM4-E |
-- |
Item Code |
013-14501 |
013-14502 |
013-14503 |
013-14504 |
-- |
|
F |
DPW Part # |
SRGM1-F |
SRGM2-F |
SRGM3-F |
SRGM4-F |
-- |
Item Code |
013-14601 |
013-14602 |
013-14603 |
013-14604 |
-- |
|
G |
DPW Part # |
SRGM1-G |
SRGM2-G |
SRGM3-G |
SRGM4-G |
-- |
Item Code |
013-14701 |
013-14702 |
013-14703 |
013-14704 |
-- |
|
H |
DPW Part # |
SRGM1-H |
SRGM2-H |
SRGM3-H |
SRGM4-H |
-- |
Item Code |
013-14801 |
013-14802 |
013-14803 |
013-14804 |
-- |
Standard Roof/Ground Mounts Optional Upgrades | |||||
DPW part # | Description | Item code | |||
HWV |
High Wind Version (add 25%) |
013-04000 |
|||
DP-SRGM-PCA |
Powder Coated Aluminum Components (add 25%) |
013-14910 |
|||
DP-SRGM-AA |
Anodized Aluminum Components (add 35%) |
013-14915 |
|||
Stainless Steel Hardware for Rack Assembly - SSH | |||||
Number of Modules |
1 |
2 |
3 |
4 |
5 |
Item code |
013-14921 |
013-14922 |
013-14923 |
013-14924 |
013-14925 |
Tamper Resistant Hardware for Module Mounting -TRH | |||||
Number of Modules |
1 |
2 |
3 |
4 |
5 |
Item code |
013-10941 |
013-10942 |
013-10943 |
013-10944 |
013-10945 |
DPW Solar products are made int he USA and can be ordered to fit virtually any module. DPW offers a variety of made-to-order DPW Roof/Ground Mounts, Top of Pole Mounts, and Multi Pole Mounts. Compare the dimensions of the module you plan to use with the sizing chart below to determine the module series.
When ordering, be sure to include a copy of the data sheet for the module you plan to use. For modules having dimensions that fall outside of the chart, use the next larger size. Most DPW mounting systems fasten to the modules using the mounting holes on the module frame, therefore modules without rear-side mounting holes cannot be used with DPW pole mount products.
The High Wind Version upgrade (not available for MPM's) is good for winds up to 130mph, class C wind zone.
Stainless steel module mounting hardware is provided with all mounts. Stainless steel hardware for the racking assembly is available as an option.
Module Series Sizing Chart | |
Module Size Range (W x L) | DPW Module Series |
19-23" x 35-44" |
A |
21-26" x 39-50" |
B |
22-27" x 56-60" |
C |
31-33" x 60-67" |
D |
38-40" x 51-53" |
E |
38-42" x 58-62" |
F |
37-42" x 61-67" |
G |
38-40" x 77-78" |
H |