|
AIR Roof Mount Kit (without Seal)
Roof mounts include vibration isolators, wall brace clamps and a safety leash, but do not include pole or lag screws.
Simple roof top tower mounts offer easy low cost installation for single or multiple AIR wind generators. These kits are designed with effective built-in vitabration isolation mounts. Installs on the side of a building or through the roof.
We do not recommend these be mounted on occupied buildings.
Kits include: Isolators, Base Plates, Clamp Sleeves, Clamp Straps, 5/16 x 1 Bolts, 5/16 Lock Washers, Safety Leashes. Does not include roof seal.
|
Description
|
Item code
|
|
AIR Marine tower hardware kit
|
016-01128
|
|
9' AIR Marine aluminum mast and 2 stays
|
016-01131
|
|
Roof kit without roof seal
|
016-01134
|
|
Roof kit with roof seal
|
016-01137
|
|
Roof seal – for roof mount kit
|
016-01140
|
|
27'; AIR guyed tower kit (AIR only)
|
016-01086
|
|
45'; AIR guyed tower kit (AIR only)
|
016-01092
|
|
36" Auger – set of 4; use with 24'; & 27'; towers
|
016-01113
|
|
36 Galvanized auger set of 4; for 24' & 27' towers
|
016-01116
|
|
48 Auger set of 4 32' - 50' towers
|
016-01119
|
|
48 Galvanized auger set of 4 32' & 50'towers
|
016-01122
|
|
AIR Shutoff/circuit breaker
|
016-09003
|
|
30 amp circuit breaker kit
|
016-01225
|
|
50 amp circuit breaker kit
|
016-01226
|
|
100 amp circuit breaker kit
|
016-01222
|
|
Amp meter kit
|
016-01223
|
|
Stop Switch for Land Versions
|
016-01351
|
|
