Powercom USA Solar King Grid Tie Inverters
The most advanced grid-tie PV inverter in the world. Converting sun light into electricity energy for home / industrial applications, and powering up our world with free solar energy is now no longer just a dream.
Powercom Solar king is the most advanced solar inverter for grid connected PV-plant. Solar king is designed base on the following principles:
High converting efficiency / boosting system effeciency via MPPT / Low cost / easy installation and maintenance / user friendly / and long-life usage.
With 3 different input voltage ranges allowing customer to have flexible choice for different applications.
96.5% high converting efficiency and up to 99% high MPPT efficiency are both above average market standard.
Solar King is designed to be user friendly and with easy installation to reduce installation costs. User can easily monitor the system status from the remote control display LCD panel.
IP-65 enclosure protects against severe outdoor installation environment.
USB & RS-232 communication ports are available for remote monitoring & control. With optional RS485 or SNMP card for future expansion.
Anti-Islanding detection methods: Frequency, voltage and utility impedance.
Build-in MPPT (Maximum Power Point Tracking) function.
High efficiency with wide range operation.
Design to meet UL-1741 or CSA Std.C22.2 No.107.1-01 requirements.
Easy assembly in production line.
Easy replacement when servicing. The mean time of service is less than 20 minutes.
Firmware flash capability: The firmware inside the micro-controllers can be updated by optional communication interface.
GFCI: Ground Fault Current Interruption, which is also known as RCD (Residual Current Device). To prevent electrical hazard of user, a current transformer monitoring the difference between L and N current is applied. When the current difference is larger than specified value stated in section “General Data”, inverter will cut its output to grid.
Bundled software for user buying optional communication card.