The SunSaver is a very reliable charge controller and uses the same battery charging algorithm as the ProStar and offers many of the advantages of the ProStar for smaller systems, at a reduced cost. Constant voltage pulse width modulation (PWM) charging is a proven advance compared to the common on/off PV regulators. SunSavers are field-selectable for sealed or flooded batteries. A rugged anodized aluminum case and epoxy encapsulated electronics ensure durability and longevity. A temperature compensation sensor in the charge controller varies full charge voltage with temperature. LVD Model, LED Charging, 24V, 10 LVD Amps. 5-year warranty. Dimensions: 6" x 2.2" x 1.3".
MorningStar SunSaver SS-10L-24V Charge Controller Rated Solar Current: 10 Amp Rated Load Current: 10 Amp System Voltage: 24 Volt Includes Low Voltage Disconnect Detailed Description: The MorningStar SunSaver line of controllers (8 models in all) have built-in temperature compensation, they are epoxy encapsulated, but are not outdoor rated since they have an exposed front mounted 7 position terminal strip. Units are available for 12 or 24V systems ranging in amperage capacity from 6-20 amps. The regulating voltage is adjustable for sealed or flooded batteries by simply removing/installing an included metal jumper between terminals 6 and 7. A green "charging" LED is standard on all SunSaver units while the units with the optional low voltage disconnect (LVD) for a DC load also have a red LED to indicate when the load has been disconnected to prevent the battery from being over discharged. Each terminal can accept up to two #10 AWG wires. It's dimensions are 6" x 2.2" x 1.3" and it weighs 8 oz. Morningstar’s SunSaver is the world’s leading small solar controller for both professional and consumer applications. SunSaver's Techonology Provides: Exceptional Reliability PWM Battery Charging Consistent High Quality The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: Automated production ISO 9002 quality programs Latest power electronic technologies Latest control and logic technologies High volume manufacturing Features Eight versions available 12 and 24 volts 6, 10 and 20 amps 100% solid state Series design (not shunt) True 0 to 100% PWM duty cycle Setpoint accuracy to 35 mV Rated for 25% overloads Fully encapsulated in epoxy potting Marine rated terminals / anodized case Temperature compensation Sealed / Flooded battery select No need to derate Parallel for 40 amps or more Green charging / Red LVD indicators
The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing:
Features
